
UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 204 of 318
#ACAL - Automatic Call
Note See &Z to write and &N to read the number on module internal phonebook.
3.5.7.1.47. Extended Automatic Call - #ACALEXT
#ACALEXT - Extended Automatic Call
AT#ACALEXT=
<mode>,<index>
Set command enables/disables the extended automatic call function.
Parameters:
<mode>
0 - disables the automatic call function (factory default)
1 - enables the automatic call function from internal phonebook.
2 - enables the automatic call function from “SM” phonebook.
3 - enables the automatic call function from “ME” phonebook.
<index> - it indicates a position in the currently selected phonebook.
If the extended automatic call function is enabled and &D2 has been issued,
the transition OFF/ON of DTR causes an automatic call to the number
stored in position <inde
x> in the selected phonebook.
Note: type of call depends on the last issue of command +FCLASS.
AT#ACALEXT? Read command reports either whether the automatic call function is
currently enabled or not, and the last <index> setting in the format:
#ACALEXT: <mode>,<index>
AT#ACALEXT=? The range of available positions in a phonebook depends on the selected
phonebook. This is the reason why the test command returns three ranges
of values: the first for parameter <mode>, the second for parameter
<index> when internal phonebook is chosen, the third for parameter
<index> when “SM” is the chosen phonebook, the fourth for parameter
<index> when “ME” is the chosen phonebook.
Note Issuing #ACALEXT causes the #ACAL <mode> to be changed.
Issuing AT#ACAL=1 cau
ses the #ACALEXT <index> to be set to default.
It is recommended to NOT use contemporaneously either #ACALEXT and
#ACAL
Note See &Z to write and &N to read the number on module internal phonebook.
3.5.7.1.48. Extended Call Monitoring - #ECAM
#ECAM - Extended Call Monitoring
AT#ECAM=
[<onoff>]
This command enables/disables the call monitoring function in the ME.
Parameter:
Commenti su questo manuale