DCS RF24R Guida di Installazione Pagina 16

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
Vedere la pagina 15
14
USING THE REFRIGERATOR CONTROL
Figure 3
Control
Door Switch
During initial startup, or anytime power is interrupted, there
will be an approximate 5 minute delay before the refrigerator
starts. During this period the controller will be assessing the
temperature in the refrigerator and the display will appear er-
ratic, this is normal. The desired temperature set point can be
programmed during this start up period.
Starting your refrigerator
The refrigerator will begin start up when initially plugged in
or when power resumes after a power outage. At this time the
refrigerator will take approximately 5 minutes to begin running
as noted above. If the refrigerator has been turned o during
use, “OFF” will appear on the display. To start the refrigerator
from the “OFF” position press and hold the ON/OFF button for
three seconds.
Set temperature
To set temperature set point, press and continue to hold “SET
button. After one second, set point will be displayed. While
holding “SET button use the WARMER or “COLDER” button to
desired set point.
NOTE: Momentarily pressing & releasing “SET button will ac-
cess information menu of control. Refer to page 15 for informa-
tion on this feature.
Refrigerator operation
The available temperature range of the refrigerator is 33° to 45°
(1° to 7° C). It may take up to 24 hours for your refrigerator to
reach desired temperature. This will depend on amount of con-
tents loaded and number of openings and closings of the door.
For best results allow refrigerator to “pull down to desired set
point before loading. Once contents are loaded, allow at least
48 hours for temperature to stabilize before making any adjust-
ments to the set point.
Alarms
Your refrigerator control will monitor refrigerator function and
alert you with a series of audible and visual alarms.
Door Ajar Alarm: If the door has been left
open for over ve (5) minutes, the alarm
will sound in one (1) second intervals. The
display panel will ash do” and the LED light will be a steady
amber color. This will stop as soon as the door is closed.
High and Low Temperature Alarm: If your
unit reaches an unacceptable temperature
outside of your set point, the alarm will
sound in one (1) second intervals. The
display panel will ash either “hi” or “Lo
depending upon the condition and the LED light will be a
steady amber color. hi” indicates that the temperature is 10° F
(5.5°C) above the set point and “Lo indicates that the tempera-
ture is 10° F (5.5°C) below the set point. The alarm will remain
active until the condition is corrected.
NOTE: During initial appliance start-up, the high temperature
alarm may sound until the interior temperature reaches set
point.
Temperature Sensor Fault: If the controller
detects that the temperature sensor is
not properly functioning, a temperature
sensor alarm will sound. “E1” will ash on the display, and an
alarm will sound. Please call Customer Service or
your dealer if this error code is displayed.
Condenser Needs Cleaning:
When the refrigerator has reached the
recommended amount of run time to neces-
sitate cleaning the air ow, cL will ash on the display as a
reminder. See the “Care and Cleaning” section for cleaning
instructions.
To clear the alarm:
1) Press and release the “SET button four times.
cnd will be displayed on the screen.
2) While cnd is displayed, press and hold the “SET but-
ton. The display will show the number of weeks the
refrigerator has been running.
3) While holding the “SET button, press and release the
ON/OFF button. The number shown on the display will
reset to 0.
4) Release the “SET key.
Alarm Mute
Press any key to mute the audible portion of an alarm,.
NOTE-This action will only mute the alarm. If the condition that
caused the alarm continues, the alarm code will continue to
ash and will sound for 20 seconds every 60 minutes.
Turning Refrigerator O
To turn refrigerator o, press and hold “ON/OFF” button for
three (3) seconds. “OFF” will appear on the display.
Additional Features
Refer to page 15 for details on additional features available.
NOTE
Vedere la pagina 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

Commenti su questo manuale

Nessun commento

Philips 320828786 manuali

Manuali dei proprietari e guide per l'utente per Plafoniera Philips 320828786.
We fornisce 1 manuali pdf Philips 320828786 per scaricare gratuitamente in base al tipo di documento: Scheda Tecnica






Più prodotti e manuali per Plafoniera Philips

Modelli Tipo di Documento
F606436 Scheda Tecnica   Philips F6064/36/, 2 pagine
407421748 Scheda Tecnica   Philips 407421748 ceiling lighting, 2 pagine
F602636U Scheda Tecnica   Philips F6026/36/U, 2 pagine
407421148 Scheda Tecnica   Philips 407421148 ceiling lighting, 2 pagine
326104886 Scheda Tecnica   Philips Ceiling light 32610/48/86, 2 pagine
320701186 Scheda Tecnica   Philips Ceiling light 32070/11/86, 2 pagine
320151176 Scheda Tecnica   Philips Ceiling light 32015/11/76, 2 pagine
320053176 Scheda Tecnica   Philips Ceiling light 32005/31/76, 2 pagine
301115548 Scheda Tecnica   Philips 30111/55/48, 2 pagine
F602536U Scheda Tecnica   Philips F6025/36/U, 2 pagine
326134848 Scheda Tecnica   Philips 32613/48/48, 2 pagine
301105548 Scheda Tecnica   Philips 30110/55/48, 2 pagine
379261716 Scheda Tecnica    Philips InStyle Ceiling light 37926/17/16, 2 pagine
690679986 Scheda Tecnica    Philips Ceiling light 69067/99/86, 2 pagine
316003148 Scheda Tecnica   Philips 316003148 ceiling lighting, 2 pagine
401535586 Scheda Tecnica   Philips Ceiling light 40153/55/86, 2 pagine
301641786 Scheda Tecnica   Philips Ceiling light 30164/17/86, 2 pagine
301753076 Scheda Tecnica   Philips Ceiling light 30175/30/76, 2 pagine
301753886 Scheda Tecnica   Philips Ceiling light 30175/38/86, 2 pagine
322081186 Scheda Tecnica   Philips Ceiling light 32208/11/86, 2 pagine